Brtvila za trup i vjetrobran

FILTRIRAJ PROIZVODE

Odaberite glavnu kategoriju proizvoda, zatim suzite izbor po podkategoriji. Možete koristiti i pretragu proizvoda iznad.

Prikazujemo 9889–9912 od 11815 rezultata

Molded Plastic Seal, Nonmetallic Special Shaped Section, Material Hemp Backing
Pošalji upit
Molded Plastic Seal, Nonmetallic Special Shaped Section, Material Hemp, Overall Length 26 Inch Nominal
Pošalji upit
Molded Plastic Seal, Outside Diameter Inch 1.460, Aperture Diameter Inch 1.200
Pošalji upit
Molded Plastic Seal, Seal, Overall Length 5.438 Inch Nominal, Cross-Sectional Width 1.800 Inch Nominal
Pošalji upit
Molded Plastic Seal, Tube Od 1/4, Angle 37.0 Degrees Nominal
Pošalji upit
Molded Rubber Seal Ring, Aperture Diameter 0.958 Inch, Outside Diameter 1.249 Inch
Pošalji upit
Molded Rubber Seal, Housing Bore Diameter 4.780 Inch, Accommodated Shaft Diameter 4.000 Inch
Pošalji upit
Molded Rubber Seal, Material Rubber Butadiene-Acrylonitrile Class NBR
Pošalji upit
Molded Rubber Seal, Plain, Construction One-Piece
Pošalji upit
Molded Rubber Seals, Body Length 1.000 Inches Maximum, Body Outside Diameter 2.000 Inches Nominal
Pošalji upit
Molded Rubber Seals, GTCP85-180C
Pošalji upit
Molded Rubber Seals, Material Rubber Synthetic Sealing Element, Material Steel Case
Pošalji upit
Molded Seal, E-3A Aircraft
Pošalji upit
Molded Seal, Kapton Material Composition, Shaft
Pošalji upit
Molded Seal, Material Rubber Fluorocarbon
Pošalji upit
Molded Seal, Metallic, Overall Length Inch 1.220 Minimum and Inch 1.230 Maximum
Pošalji upit
Molded Seal, Nickel Alloy, Conical, Flared Tube Fitting, Overall Length 0.162 Inch Nominal
Pošalji upit
Molded Seal, Peripheral Diameter 0.387 Inch Nominal, Cross-Sectional Height 0.075 Inch Minimum and 0.085 Inch Maximum
Pošalji upit
Molded Seal, Plastic
Pošalji upit
Molded Seal, Rubber Synthetic Sealing Element, Steel Case
Pošalji upit
Molded Seal, Silicon, Dry Pressure
Pošalji upit
Molded Seal, Special Seal, B707 Aircraft
Pošalji upit
Molded Seal, Stainless Steel, Overall Diameter 1.760 Inches Minimum and 1.770 Inches Maximum
Pošalji upit
Molded Seal, Steel Case, Angular Sealing Element
Pošalji upit

Molded Plastic Seal, Nonmetallic Special Shaped Section, Material Hemp Backing

Molded Plastic Seal, Nonmetallic Special Shaped Section, Material Hemp, Overall Length 26 Inch Nominal

Molded Plastic Seal, Outside Diameter Inch 1.460, Aperture Diameter Inch 1.200

Molded Plastic Seal, Seal, Overall Length 5.438 Inch Nominal, Cross-Sectional Width 1.800 Inch Nominal

Molded Plastic Seal, Tube Od 1/4, Angle 37.0 Degrees Nominal

Molded Rubber Seal Ring, Aperture Diameter 0.958 Inch, Outside Diameter 1.249 Inch

Molded Rubber Seal, Housing Bore Diameter 4.780 Inch, Accommodated Shaft Diameter 4.000 Inch

Molded Rubber Seal, Material Rubber Butadiene-Acrylonitrile Class NBR

Molded Rubber Seal, Plain, Construction One-Piece

Molded Rubber Seals, Body Length 1.000 Inches Maximum, Body Outside Diameter 2.000 Inches Nominal

Molded Rubber Seals, GTCP85-180C

Molded Rubber Seals, Material Rubber Synthetic Sealing Element, Material Steel Case

Molded Seal, E-3A Aircraft

Molded Seal, Kapton Material Composition, Shaft

Molded Seal, Material Rubber Fluorocarbon

Molded Seal, Metallic, Overall Length Inch 1.220 Minimum and Inch 1.230 Maximum

Molded Seal, Nickel Alloy, Conical, Flared Tube Fitting, Overall Length 0.162 Inch Nominal

Molded Seal, Peripheral Diameter 0.387 Inch Nominal, Cross-Sectional Height 0.075 Inch Minimum and 0.085 Inch Maximum

Molded Seal, Plastic

Molded Seal, Rubber Synthetic Sealing Element, Steel Case

Molded Seal, Silicon, Dry Pressure

Molded Seal, Special Seal, B707 Aircraft

Molded Seal, Stainless Steel, Overall Diameter 1.760 Inches Minimum and 1.770 Inches Maximum

Molded Seal, Steel Case, Angular Sealing Element